← Binghamton
PIZZA ON THE PLAZA
365 HARRY L. DRIVE, JOHNSON CITY, NY 13790
Last inspected Jan 20, 2026
This source doesn’t issue a letter grade, so CleanPlate derived the status from the reported violation data.
✓
derivedOrder for delivery
Inspection history
Jan 20, 2026
✓Jan 6, 2026
✕3 violations
- Non food contact surfaces of equipment not clean
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Critical:Food from unapproved source, spoiled, adulterated on premises.
Jan 7, 2025
✕3 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Critical:Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45�F as required.
- Non food contact surfaces of equipment not clean
Mar 8, 2024
✓2 violations
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Non food contact surfaces of equipment not clean
Feb 2, 2023
✓5 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Insects, rodents present
- Non food contact surfaces of equipment not clean
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
Jan 26, 2022
✓6 violations
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
Jan 8, 2021
✕10 violations
- Critical:Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
- Non food contact surfaces of equipment not clean
- Hair is improperly restrained
- In use food dispensing utensils improperly stored
- Improper use and storage of clean, sanitized equipment and utensils
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Critical:Other Violations Deemed a Public Health Hazard by the Permit Issuing Official {14-1.10(a)}
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
Mar 5, 2019
✓7 violations
- Non food contact surfaces of equipment not clean
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Hair is improperly restrained
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
Feb 27, 2018
✕3 violations
- Improper use and storage of clean, sanitized equipment and utensils
- Critical:Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Feb 2, 2017
✓Feb 3, 2016
✓3 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Feb 3, 2015
✓2 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
Jan 23, 2014
✓1 violation
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Feb 21, 2013
✓Mar 11, 2011
✓9 violations
- Non food contact surfaces of equipment not clean
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Hair is improperly restrained
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Improper use and storage of clean, sanitized equipment and utensils
Jun 21, 2010
✕14 violations
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Hair is improperly restrained
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Insects, rodents present
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Critical:Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- In use food dispensing utensils improperly stored
- Non food contact surfaces of equipment not clean
Mar 24, 2009
✓6 violations
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Mar 28, 2008
✓7 violations
- In use food dispensing utensils improperly stored
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Hair is improperly restrained
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Non food contact surfaces of equipment not clean
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Mar 21, 2007
✓7 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Improper use and storage of clean, sanitized equipment and utensils
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
Jul 21, 2005
✓Aug 25, 2004
✓Aug 18, 2004
✓Jul 19, 2004
✓Feb 21, 2003
✓Mar 11, 2002
✓
More in Binghamton
Source: New York State Department of Health. Data shown unmodified from the official record. See something wrong? Report a data issue.