TULLY'S GOOD TIMES

Order for delivery

Inspection history

1. Jan 27, 2026

   ✓
   1 violation

   • Non food contact surfaces of equipment not clean

2. Feb 7, 2025

   ✓
   4 violations

   • Non food contact surfaces of equipment not clean
   • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
   • Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
   • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces

3. Jun 17, 2024

   ✓
   5 violations

   • Non food contact surfaces of equipment not clean
   • Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
   • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
   • Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
   • Improper use and storage of clean, sanitized equipment and utensils

4. Apr 10, 2023

   ✓
   4 violations

   • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
   • Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
   • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
   • Non food contact surfaces of equipment not clean

5. Mar 22, 2022

   ✓
   5 violations

   • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
   • Non food contact surfaces of equipment not clean
   • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
   • Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
   • In use food dispensing utensils improperly stored

6. Aug 19, 2021

   ✓
   5 violations

   • Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
   • Improper use and storage of clean, sanitized equipment and utensils
   • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
   • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
   • Non food contact surfaces of equipment not clean

7. Jul 13, 2020

   ✕
   4 violations

   • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
   • Non food contact surfaces of equipment not clean
   • Critical:Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
   • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces

8. May 30, 2019

   ✓
   2 violations

   • Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
   • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)

9. May 23, 2019

   ✕
   4 violations

   • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
   • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
   • Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
   • Critical:Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45�F as required.

10. May 17, 2018

    ✓
    4 violations

    • Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
    • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans

11. Mar 13, 2017

    ✓
    2 violations

    • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)

12. Mar 6, 2017

    ✓
    7 violations

    • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Wiping cloths dirty, not stored properly in sanitizing solutions
    • Non food contact surfaces of equipment not clean
    • Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
    • Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans

13. May 24, 2016

    ✓
    1 violation

    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)

14. Aug 6, 2015

    ✓
    1 violation

    • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions

15. Jan 22, 2014

    ✓
    3 violations

    • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)

16. Jan 16, 2013

    ✓

17. Jan 8, 2013

    ✕
    7 violations

    • Tobacco is used; eating, drinking in food preparation, dishwashing food storage areas
    • Improper use and storage of clean, sanitized equipment and utensils
    • Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
    • Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
    • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
    • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Critical:Canned foods found in poor conditions (leakers, severe dents, rusty, swollen cans)

18. Mar 19, 2012

    ✓
    5 violations

    • Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
    • Wiping cloths dirty, not stored properly in sanitizing solutions
    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
    • Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
    • Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs

19. Oct 6, 2011

    ✓
    2 violations

    • Non food contact surfaces of equipment not clean
    • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces

20. Mar 3, 2011

    ✕
    3 violations

    • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
    • Critical:Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.

21. May 26, 2010

    ✕
    10 violations

    • Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
    • Non food contact surfaces of equipment not clean
    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
    • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
    • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
    • Critical:Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
    • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
    • Improper use and storage of clean, sanitized equipment and utensils

22. Mar 12, 2009

    ✓
    8 violations

    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
    • Wiping cloths dirty, not stored properly in sanitizing solutions
    • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
    • Non food contact surfaces of equipment not clean
    • Improper use and storage of clean, sanitized equipment and utensils
    • Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
    • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred

23. Mar 31, 2008

    ✕
    4 violations

    • Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
    • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
    • Critical:Canned foods found in poor conditions (leakers, severe dents, rusty, swollen cans)

24. Mar 24, 2008

    ✕
    8 violations

    • Insects, rodents present
    • Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
    • Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
    • Improper use and storage of clean, sanitized equipment and utensils
    • Critical:Potentially hazardous foods are not kept at or above 140�F during hot holding.
    • Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
    • Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained

25. Feb 28, 2007

    ✓
    5 violations

    • Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
    • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
    • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Improper use and storage of clean, sanitized equipment and utensils
    • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces