CleanPlateHealth grades you can trust.
← Cincinnati

"A CATERED AFFAIR"

2801 MCMICKEN AV, CINCINNATI, OH 45225

Last inspected Nov 7, 2016

–
Not graded
Find on Google View on Google Maps

Order for delivery

DoorDashUber EatsGrubhub

Inspection history

  1. Nov 7, 2016

    –
    15 violations
    • "III. Preventing Contamination by Hands Adequate handwashing facilities supplied and accessible; hands clean and properly washed; no bare hand contact with ready-to-eat foods."
    • "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection. "
    • "VII. Protection from Contamination Food separated and protected; food contact surfaces cleaned and sanitized; proper disposition of returned, previously served, reconditioned, and unsafe food."
    • "VI. Time/Temperature Controlled Safety Food Proper: cooking time and temperatures; reheating procedures for hot holding; cooling time and temperatures; hot holding temperatures; cold holding temperatures; date marking and disposition. Time as a public health control procedures and record."
    • "3717-1-06.2(I)(3) - Violation - Facilities-lighting intensity prep and safety areas The light intensity was <50 foot candles in food prep or other area where employee safety is a factor."
    • "3717-1-06.1(C)(1) - Violation - Facilities-floor & wall juncture covered Floor and wall junctures not coved or not closed to no larger than =1/32 inch."
    • "3717-1-06.0(A)(1)(a) - Violation - Facilities-floors, walls, ceilings Indoor floor, wall, or ceiling surfaces are not smooth, durable, and easily cleanable in areas where FSO or RFE activities are conducted."
    • "3717-1-05.1(C)(1) - Violation - Handwashing facility-installation. Handwashing sink does not provide water at a temperature =100° F."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-06.4(L) - Violation - Facilities: Removing pests: The operator failed to remove dead pest(s) in a timely manner. "
    • "3717-1-06.4(K) - Violation - Facilities: Pest control: The presence of insects, rodents, and other pests is not being adequately controlled or minimized."
    • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
    • "3717-1-04.5(A)(1)&(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-03.4(G)(2) - Violation - RTE TCS, date marking-prepared in processing plant Ready-to-eat, TCS food that was prepared in a food processing plant and subsequently opened in a FSO or a RFE is not properly date marked."

  2. Oct 11, 2016

    –
    10 violations
    • "3717-1-06.4(L) - Violation - Facilities: Removing pests: The operator failed to remove dead pest(s) in a timely manner. "
    • "3717-1-06.4(K) - Violation - Facilities: Pest control: The presence of insects, rodents, and other pests is not being adequately controlled or minimized."
    • "3717-1-04.5(A)(1)&(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-06.2(I)(3) - Violation - Facilities-lighting intensity prep and safety areas The light intensity was <50 foot candles in food prep or other area where employee safety is a factor."
    • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "VI. Time/Temperature Controlled Safety Food Proper: cooking time and temperatures; reheating procedures for hot holding; cooling time and temperatures; hot holding temperatures; cold holding temperatures; date marking and disposition. Time as a public health control procedures and record."
    • "VII. Protection from Contamination Food separated and protected; food contact surfaces cleaned and sanitized; proper disposition of returned, previously served, reconditioned, and unsafe food."
    • "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection. "
    • "3717-1-03.4(G)(2) - Violation - RTE TCS, date marking-prepared in processing plant Ready-to-eat, TCS food that was prepared in a food processing plant and subsequently opened in a FSO or a RFE is not properly date marked."

  3. Jun 1, 2016

    –
    11 violations
    • "3717-1-06.0(A)(1)(a) - Violation - Facilities-floors, walls, ceilings Indoor floor, wall, or ceiling surfaces are not smooth, durable, and easily cleanable in areas where FSO or RFE activities are conducted."
    • "3717-1-06.2(I)(3) - Violation - Facilities-lighting intensity prep and safety areas The light intensity was <50 foot candles in food prep or other area where employee safety is a factor."
    • "3717-1-06.1(C)(1) - Violation - Facilities-floor & wall juncture covered Floor and wall junctures not coved or not closed to no larger than =1/32 inch."
    • "3717-1-05.1(C)(1) - Violation - Handwashing facility-installation. Handwashing sink does not provide water at a temperature =100° F."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-03.4(H)(1) - Violation - RTE TCS food, date marking disposition Ready-to-eat, TCS food was not discarded by the date mark, or was undated and not discarded or was not discarded when the date mark exceeded the required time/temperature combination."
    • "3717-1-03.4(G)(2) - Violation - RTE TCS, date marking-prepared in processing plant Ready-to-eat, TCS food that was prepared in a food processing plant and subsequently opened in a FSO or a RFE is not properly date marked."
    • "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection. "
    • "VI. Time/Temperature Controlled Safety Food Proper: cooking time and temperatures; reheating procedures for hot holding; cooling time and temperatures; hot holding temperatures; cold holding temperatures; date marking and disposition. Time as a public health control procedures and record."
    • "III. Preventing Contamination by Hands Adequate handwashing facilities supplied and accessible; hands clean and properly washed; no bare hand contact with ready-to-eat foods."

  4. Dec 4, 2015

    ✓
    4 violations
    • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-03.2(Q) - Violation - Food Storage--preventing contamination form the premises Food items are not protected from contamination during storage. "
    • "3717-1-06.4(D)(1) - Violation - Facilities: Ventilation systems: Cleaning Intake and exhaust air ducts are a source of contamination by dust, dirt, and other materials."

  5. Aug 10, 2015

    ✓
    3 violations
    • "3717-1-06.2(B) - Violation - Physical facilities: numbers and capacities.Handwashing cleanser - availability. Each handwashing lavatory did not have a supply of hand cleaning liquid,powder or bar soap."
    • "3717-1-03.2(Q) - Violation - Food Storage--preventing contamination form the premises Food items are not protected from contamination during storage. "
    • "3717-1-06.1(F)(1) - Violation - Facilities: Wall, Ceiling coverings: Cleanable Wall and ceiling covering materials were not attached so that they are easily cleanable."

  6. Jan 12, 2015

    ✓
    3 violations
    • "3717-1-03.2(Q) - Violation - Food Storage--preventing contamination form the premises Food items are not protected from contamination during storage. "
    • "3717-1-06.4(H) - Violation - Facilities: Cleaning and maintenance of plumbing fixtures Maintaining and using handwashing facilities: Handwashing facilities are not being kept clean, and maintained and used as specified under paragraph (O) of rule 3717-1-05.1 of the Administrative Code."
    • "3717-1-04.8(G)(1) - Violation - Kitchenware and tableware - handling. Single-service or single-use articles or cleaned and sanitized utensils were not handled, displayed, and dispensed so that contamination of food-and lip-contact surfaces is prevented."

  7. Oct 29, 2014

    ✓

  8. Aug 12, 2014

    ✓
    6 violations
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-03.2(Q) - Violation - Food Storage--preventing contamination form the premises Food items are not protected from contamination during storage. "
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.4(N) - Violation - Warewashing Equipment - Chemical Sanitization A chemical sanitizer was improperly used."
    • "3717-1-06.2(E) - Violation - Facilities: Handwashing signage: Provided A handwashing sign was not posted at all handwashing lavatories."
    • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."

  9. Feb 4, 2014

    ✓
    6 violations
    • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
    • "3717-1-03.2(Q) - Violation - Food Storage--preventing contamination form the premises Food items are not protected from contamination during storage. "
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.4(N) - Violation - Warewashing Equipment - Chemical Sanitization A chemical sanitizer was improperly used."
    • "3717-1-06.2(E) - Violation - Facilities: Handwashing signage: Provided A handwashing sign was not posted at all handwashing lavatories."
    • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."

  10. Aug 22, 2013

    –
    4 violations
    • "VII. Cooking, Reheating, Cooling, Hot and Cold Holding Proper cooking temperatures and parameters are as specified in Ohio Administrative Code. Potentially hazardous foods that have been cooked and refrigerated are reheated for hot holding within 2 hours to 165 F. Cooked potentially hazardous foods are cooled from 135 F to 70 F within two hours and from 70 F to 41 F or below within 4 hours. Hot foods are being held at 135 F or above and cold foods are being held at 41 F or below."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-06.0(A)(1)(a) - Violation - Facilities: Floors, Walls, Ceilings Materials for indoor floor, wall, and ceiling surfaces are not smooth, durable, and easily cleanable for areas where food service activities or retail food establishment activities are conducted."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."

  11. Jul 15, 2013

    –
    6 violations
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-03.2(D) - Violation - Food Storage containers--common name ID Working containers of food are not properly labeled. "
    • "3717-1-03.4(G)(1) - Violation - RTE PHF, date marking, food prepared in facility Refrigerated, ready-to-eat, potentially hazardous food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked. "
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-06.0(A)(1)(a) - Violation - Facilities: Floors, Walls, Ceilings Materials for indoor floor, wall, and ceiling surfaces are not smooth, durable, and easily cleanable for areas where food service activities or retail food establishment activities are conducted."
    • "VII. Cooking, Reheating, Cooling, Hot and Cold Holding Proper cooking temperatures and parameters are as specified in Ohio Administrative Code. Potentially hazardous foods that have been cooked and refrigerated are reheated for hot holding within 2 hours to 165 F. Cooked potentially hazardous foods are cooled from 135 F to 70 F within two hours and from 70 F to 41 F or below within 4 hours. Hot foods are being held at 135 F or above and cold foods are being held at 41 F or below."

  12. Jan 29, 2013

    –
    7 violations
    • "VII. Cooking, Reheating, Cooling, Hot and Cold Holding Proper cooking temperatures and parameters are as specified in Ohio Administrative Code. Potentially hazardous foods that have been cooked and refrigerated are reheated for hot holding within 2 hours to 165 F. Cooked potentially hazardous foods are cooled from 135 F to 70 F within two hours and from 70 F to 41 F or below within 4 hours. Hot foods are being held at 135 F or above and cold foods are being held at 41 F or below."
    • "3717-1-03.4(F)(1)(b) - Violation - PHF, 41F cold holding TCS foods were being held temperatures above 41F (5C). "
    • "3717-1-05.1(S)(2) - Violation - Plumbing system - maintained in good repair Plumbing system is not maintained in good repair."
    • "3717-1-04.4(F)(2) - Violation - Warewashing sinks-use limitation, cleaning. Warewashing sink was not properly cleaned and/or sanitized."
    • "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
    • "3717-1-04.2(G)(1) - Violation - Food temperature measuring devices. The operator did not have a food thermometer readily accessible. "
    • "XV. Temperature Measuring Devices Temperature measuring devices are provided and readily accessible that are properly designed and calibrated."

  13. Aug 20, 2012

    ✓
    11 violations
    • "3717-1-04.1(O) - Violation - Equipment Openings-Closures and Deflectors Equipment openings, closures, and deflectors were not designed as required."
    • "3717-1-06.0(A)(1)(a) - Violation - Facilities: Floors, Walls, Ceilings Materials for indoor floor, wall, and ceiling surfaces are not smooth, durable, and easily cleanable for areas where food service activities or retail food establishment activities are conducted."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-04.1(H) - Violation - Nonfood Contact Surfaces-Cleanability Nonfood-contact surfaces were not designed and constructed to allow easy cleaning and to facilitate maintenance."
    • "3717-1-07.0(B) - Violation - Poisonous or toxic materials -working containers Working containers of poisonous or toxic materials are not labeled."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.8(A)(1) - Violation - Equipment and utensils - air-drying required. Equipment and utensils are not being air dried or allowed to drain adequately after sanitizing."
    • "3717-1-03.4(G)(2) - Violation - RTE PHF, date marking-prepared in processing plant Ready-to-eat, TCS food that was prepared in a food processing plant and subsequently opened in a food service operation or a retail food establishment is not properly date marked. "
    • "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-- use limitation To prevent the growth of bacteria and the subsequent contamination of equipment, wiping cloths used for wiping food spills shall be stored in a chemical sanitizer of the appropriate concentration and shall be laundered daily."
    • "3717-1-06.4(K) - Violation - Facilities: Pest control: The presence of insects, rodents, and other pests is not being adequately controlled or minimized."
    • "3717-1-06.1(M)(1) - Violation - Facilities: Outer openings: Holes, gaps sealed Outer openings of a food facility were not protected against the entry of insects and rodents."

  14. Aug 13, 2012

    –
    11 violations
    • "3717-1-03.4(G)(2) - Violation - RTE PHF, date marking-prepared in processing plant Ready-to-eat, TCS food that was prepared in a food processing plant and subsequently opened in a food service operation or a retail food establishment is not properly date marked. "
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.1(H) - Violation - Nonfood Contact Surfaces-Cleanability Nonfood-contact surfaces were not designed and constructed to allow easy cleaning and to facilitate maintenance."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-06.0(A)(1)(a) - Violation - Facilities: Floors, Walls, Ceilings Materials for indoor floor, wall, and ceiling surfaces are not smooth, durable, and easily cleanable for areas where food service activities or retail food establishment activities are conducted."
    • "3717-1-04.1(O) - Violation - Equipment Openings-Closures and Deflectors Equipment openings, closures, and deflectors were not designed as required."
    • "3717-1-06.1(M)(1) - Violation - Facilities: Outer openings: Holes, gaps sealed Outer openings of a food facility were not protected against the entry of insects and rodents."
    • "3717-1-06.4(K) - Violation - Facilities: Pest control: The presence of insects, rodents, and other pests is not being adequately controlled or minimized."
    • "3717-1-07.0(B) - Violation - Poisonous or toxic materials -working containers Working containers of poisonous or toxic materials are not labeled."
    • "3717-1-04.8(A)(1) - Violation - Equipment and utensils - air-drying required. Equipment and utensils are not being air dried or allowed to drain adequately after sanitizing."
    • "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-- use limitation To prevent the growth of bacteria and the subsequent contamination of equipment, wiping cloths used for wiping food spills shall be stored in a chemical sanitizer of the appropriate concentration and shall be laundered daily."

  15. Feb 2, 2012

    ✓

Source: Cincinnati Health Department. Data shown unmodified from the official record. See something wrong? Report a data issue.