"DUNKIN' DONUTS / BASKIN ROBBINS"

Order for delivery

Inspection history

1. Dec 31, 2019

   –
   10 violations

   • "3717-1-05.4(P) - Violation - Refuse/recyclables/returnables-unnecessary items Storage area and enclosure for refuse/recyclables/returnables is not clean or free of unnecessary items."
   • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
   • "3717-1-05.4(N)(2) - Violation - Refuse/recyclables/returnables-covered outside Outdoor refuse/recyclables/returnables receptacles are not covered with tight fitting lids or doors."
   • "3717-1-04.5(D) - Violation - Non-food contact surfaces-Cleaning Frequency Nonfood-contact surfaces are not cleaned frequently enough."
   • "3717-1-03.2(K) - Violation - In-use utensils-between-use storage In-use utensils are improperly stored."
   • "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage."
   • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
   • "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection."
   • "3717-1-02.4(C)(17) - Violation - PIC Duties -response plan for vomiting/diarrhea No/inadequate written procedures for response to vomiting/diarrheal events."
   • ""

2. Sep 18, 2019

   –
   1 violation

   • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."

3. Jul 26, 2019

   –
   4 violations

   • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
   • "3717-1-05.4(N)(2) - Violation - Refuse/recyclables/returnables-covered outside Outdoor refuse/recyclables/returnables receptacles are not covered with tight fitting lids or doors."
   • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
   • "3717-1-02.4(C)(16) - Violation - PIC Duties -response plan for vomiting/diarrhea No/inadequate written procedures for response to vomiting/diarrheal events."

4. Aug 22, 2018

   –
   1 violation

   • "3717-1-06.4(K) - Violation - Facilities: Pest control: The presence of insects, rodents, and other pests is not being adequately controlled or minimized."

5. Jul 16, 2018

   –
   9 violations

   • "3717-1-06.2(C) - Violation - Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
   • "3717-1-05.1(O)(2) - Violation - Using handwashing facility-Other purposes Handwashing facility is being used for purposes other than handwashing. "
   • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
   • "3717-1-04.5(A)(1)&(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
   • "3717-1-03.5(C) - Violation - Food labels-required information Food is not properly labeled. "
   • "3717-1-03.2(C)(8) - Violation - Protection from Contamination-Food Storage Food is stored unwrapped or in uncovered containers."
   • "3717-1-02.4(C)(16) - Violation - PIC Duties -response plan for vomiting/diarrhea No/inadequate written procedures for response to vomiting/diarrheal events."
   • "3717-1-02.4(B) - Violation - PIC Demonstration of Knowledge The person in charge was unable to demonstrate the necessary food safety knowledge. "
   • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."

6. Dec 4, 2017

   –
   8 violations

   • "3717-1-03.2(K) - Violation - In-use utensils-between-use storage In-use utensils are improperly stored. "
   • "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection. "
   • "3717-1-03.2(C)(8) - Violation - Protection from Contamination-Food Storage Food is stored unwrapped or in uncovered containers."
   • "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage. "
   • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
   • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
   • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
   • "3717-1-06.2(I)(3) - Violation - Facilities-lighting intensity prep and safety areas The light intensity was <50 foot candles in food prep or other area where employee safety is a factor."

7. Sep 18, 2017

   –
   4 violations

   • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
   • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
   • "3717-1-04.8(A)(1) - Violation - Equipment and utensils-air-drying required. Equipment and utensils are not being air dried or allowed to drain adequately after sanitizing."
   • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."

8. Aug 17, 2017

   –
   4 violations

   • "3717-1-06.4(N) - Violation - Maintaining premises: unnecessary items and litter. There are unnecessary or nonfunctional items and /or litter on the premises. "
   • "3717-1-04.4(Q) - Violation - Utensils, measuring devices-repair/calibration. Utensils, temperature measuring, or pressure measuring devices were not kept in good repair and/or calibration."
   • "3717-1-04.4(A)(2) - Violation - Equipment,good repair, doors, seals Equipment components were not intact, tight or properly adjusted. "
   • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."

9. Jun 30, 2017

   –
   4 violations

   • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
   • "3717-1-04.8(A)(1) - Violation - Equipment and utensils-air-drying required. Equipment and utensils are not being air dried or allowed to drain adequately after sanitizing."
   • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
   • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."

10. Oct 13, 2016

    –
    9 violations

    • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
    • "3717-1-05.1(O)(2) - Violation - Using handwashing facility-Other purposes Handwashing facility is being used for purposes other than handwashing. "
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.5(A)(1)&(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
    • "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed. "
    • "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage. "
    • "3717-1-03.2(K) - Violation - In-use utensils-between-use storage In-use utensils are improperly stored. "

11. May 23, 2016

    –
    4 violations

    • "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage. "
    • "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed. "
    • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
    • "3717-1-04.3(B)(1) - Violation - Fixed equipment installation-spacing or sealing. Fixed equipment was not properly installed."

12. Nov 5, 2015

    –
    5 violations

    • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-03.4(F)(1)(a) - Violation - TCS - Hot Holding TCS foods were being held at temperatures below 135° F or a roast was being held below 130° F."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-06.2(C) - Violation - Handwashing Facilities - Hand Drying Provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
    • "3717-1-07.0(B) - Violation - Poisonous or toxic materials -working containers Working containers of poisonous or toxic materials are not labeled."

13. May 15, 2015

    –
    8 violations

    • "3717-1-05.1(S)(1) - Violation - Plumbing system - maintained in good repair Plumbing system is not repaired according to the Ohio building code."
    • "3717-1-04.8(A)(1) - Violation - Equipment and utensils - air-drying required. Equipment and utensils are not being air dried or allowed to drain adequately after sanitizing."
    • "3717-1-04.5(B)(2)(c) - Violation - Utensils / TCS Cleaning frequency Containers of ready-to-eat TCS food in a serving situation are not cleaned at least every twenty-four hours."
    • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-03.4(H)(1) - Violation - RTE TCS food, date marking disposition Ready-to-eat, potentially hazardous food was not discarded by the date mark, or was undated and not discarded or was not discarded when the date mark exceeded the required time/temperature combination.. "
    • "3717-1-03.4(D)(4) - Violation - Cooling PHF, temperature & time for eggs Raw shell eggs were not properly refrigerated after being received. "
    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-03.2(D) - Violation - Food Storage containers--common name ID Working containers of food are not properly labeled. "

14. Nov 6, 2014

    –
    12 violations

    • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-04.5(B)(2)(b) - Violation - PHF Cleaning frequency Utensils or equipment are not cleaned at the proper frequency or the frequency is not documented"
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.3(B)(1)(a-c) - Violation - Fixed equipment installation-spacing or sealing. Fixed equipment was not properly installed."
    • "3717-1-03.2(D) - Violation - Food Storage containers--common name ID Working containers of food are not properly labeled. "
    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-04.8(A)(1) - Violation - Equipment and utensils - air-drying required. Equipment and utensils are not being air dried or allowed to drain adequately after sanitizing."
    • "3717-1-06.2(I)(1) - Violation - Facilities: Lighting: Intensity The light intensity was not at least 10 foot candles (110 lux) at a distance of 30 inches (seventy-five centimeters) above the floor, in walk-in refrigeration units and dry food storage areas and in other areas and rooms during periods of cleaning;"
    • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-05.1(S)(1) - Violation - Plumbing system - maintained in good repair Plumbing system is not repaired according to the Ohio building code."
    • "3717-1-02.3(A)(1)(2)(3) - Violation - Employee Drinks Observed unacceptable employee beverage containers. "

15. May 20, 2014

    –
    9 violations

    • "3717-1-07.1(A) - Violation - Poisonous or toxic materials -storage: separation Poisonous or toxic materials are stored in a manner that could contaminate food, equipment, utensils, linens, or single-service or single-use articles. "
    • "3717-1-05.1(O)(1) - Violation - Using a handwashing facility - Accessibility Access to handwashing facility blocked. "
    • "3717-1-04.8(G)(2) - Violation - Kitchenware and tableware - handling. Knives, forks, and spoons that are not prewrapped were not presented so that only the handles are touched by employees and by consumers if consumer self-service is provided"
    • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
    • "3717-1-03.5( C ) - Violation - Food labels--required information Food is not properly labeled. "
    • "3717-1-03.4(H)(1) - Violation - RTE TCS food, date marking disposition Ready-to-eat, potentially hazardous food was not discarded by the date mark, or was undated and not discarded or was not discarded when the date mark exceeded the required time/temperature combination.. "
    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."

16. Oct 10, 2013

    –
    3 violations

    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
    • "3717-1-03.2(D) - Violation - Food Storage containers--common name ID Working containers of food are not properly labeled. "

17. Jun 13, 2013

    –
    5 violations

    • "3717-1-03.2(D) - Violation - Food Storage containers--common name ID Working containers of food are not properly labeled. "
    • "3717-1-04.4(P) - Violation - Warewashing equipment -sanitizer concentration. Sanitizer concentration is not being monitored."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-04.8(G)(1) - Violation - Kitchenware and tableware - handling. Single-service or single-use articles or cleaned and sanitized utensils were not handled, displayed, and dispensed so that contamination of food-and lip-contact surfaces is prevented."

18. Feb 1, 2013

    ✓

19. Dec 12, 2012

    ✓

20. Jun 11, 2012

    –
    4 violations

    • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-04.4(A)(2) - Violation - Equipment,good repair, doors, seals Equipment components were not intact, tight or properly adjusted. "

21. Jun 5, 2012

    –
    4 violations

    • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
    • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-04.4(A)(2) - Violation - Equipment,good repair, doors, seals Equipment components were not intact, tight or properly adjusted. "
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."

22. Not recorded

    –
    1 violation

    • ""