"GRILL OF INDIA"

Order for delivery

Inspection history

1. Jul 24, 2019

   ✓

2. May 6, 2019

   –
   24 violations

   • "3717-1-06.1(C)(1) - Violation - Facilities-floor and wall juncture covered Floor and wall junctures not coved or not closed to no larger than =1/32 inch."
   • "3717-1-07.1(J) - Violation - Poisonous/toxic material-restricted use pesticides Improper use or application of a restricted use pesticide."
   • "3717-1-03.4(C) - Violation - Thawing TCS-Temperature / Time Control TCS food was improperly thawed."
   • "3717-1-03.2(D) - Violation - Food Storage containers-common name ID Working containers of food are not properly labeled."
   • "3717-1-06.4(L) - Violation - Facilities: Removing pests: The operator failed to remove dead pest(s) in a timely manner. "
   • "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage."
   • "3717-1-03.2(T) - Violation - Food preparation-preventing contamination Food is not protected from environmental sources of contamination during preparation."
   • "3717-1-03.2(K) - Violation - In-use utensils-between-use storage In-use utensils are improperly stored."
   • "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-use limitation Wet wiping cloth was not maintained in a sanitizer solution between uses."
   • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
   • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
   • "3717-1-06.0(A)(1)(a) - Violation - Facilities-floors, walls, ceilings Indoor floor, wall, or ceiling surfaces are not smooth, durable, and easily cleanable in areas where FSO or RFE activities are conducted."
   • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
   • "3717-1-04.5(D) - Violation - Non-food contact surfaces-Cleaning Frequency Nonfood-contact surfaces are not cleaned frequently enough."
   • "3717-1-04.4(A)(2) - Violation - Equipment,good repair, doors, seals Equipment components were not intact, tight or properly adjusted. "
   • "3717-1-04.1(KK) - Violation - Food Equipment-Certification and Classification Equipment is not approved by a recognized testing agency or authority."
   • "3717-1-04.8(E)(2)(a)(b) - Violation - Equipment, linens, single-service items-storage. Clean equipment and utensils were not properly stored."
   • "3717-1-02.4(B)(16) - Violation - PIC Knowledge-explain complying with reporting responsibilities The person in charge shall be able to explain how the PIC, food employees, and conditional employees comply with reporting responsibilities and exclusion or restriction of food employees."
   • "3717-1-06.2(C) - Violation - Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
   • "3717-1-03.2(C)(1) - Violation - Preventing Contamination by Separation, Packaging, and Segregation Ready-to-eat food was not protected from cross-contamination by raw animal food."
   • "3717-1-03.2(C)(8) - Violation - Protection from Contamination-Food Storage Food is stored unwrapped or in uncovered containers."
   • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
   • "3717-1-03.4(F)(1)(b) - Violation - TCS-cold holding TCS foods were being held at temperatures >41° F."
   • "3717-1-03.4(G)(1) - Violation - RTE TCS, date marking, food prepared in facility Refrigerated, ready-to-eat, TCS food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked."

3. Mar 19, 2018

   –
   15 violations

   • "IV. Demonstration of Knowledge Person in Charge demonstrates knowledge by being certified in food protection, responding to food safety questions regarding the operation, or operation complies with the Ohio Administrative Code."
   • "3717-1-03.4(C) - Violation - Thawing TCS-Temperature & Time Control TCS food was improperly thawed."
   • "VII. Protection from Contamination Food separated and protected; food contact surfaces cleaned and sanitized; proper disposition of returned, previously served, reconditioned, and unsafe food."
   • "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection. "
   • "VI. Time/Temperature Controlled Safety Food Proper: cooking time and temperatures; reheating procedures for hot holding; cooling time and temperatures; hot holding temperatures; cold holding temperatures; date marking and disposition. Time as a public health control procedures and record."
   • "3717-1-06.4(L) - Violation - Facilities: Removing pests: The operator failed to remove dead pest(s) in a timely manner. "
   • "3717-1-06.4(K) - Violation - Facilities: Pest control: The presence of insects, rodents, and other pests is not being adequately controlled or minimized."
   • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
   • "3717-1-06.2(C) - Violation - Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
   • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
   • "3717-1-03.4(G)(1) - Violation - RTE TCS, date marking, food prepared in facility Refrigerated, ready-to-eat, TCS food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked. "
   • "3717-1-04.5(C ) - Violation - Cooking / Baking equipment-Cleaning Frequency Food contact surfaces of cooking and baking equipment or cavities and door seals of microwaves were not cleaned frequently enough."
   • "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-use limitation Wet wiping cloth was not maintained in a sanitizer solution between uses."
   • "3717-1-02.4(B) - Violation - PIC Demonstration of Knowledge The person in charge was unable to demonstrate the necessary food safety knowledge. "
   • "3717-1-04.6(B) - Violation - Sanitizing frequency-before use after cleaning. Equipment food-contact surfaces or utensils were not sanitized before use after cleaning."

4. Mar 13, 2018

   –
   34 violations

   • "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
   • "3717-1-03.0 - Violation - Food Safe, Unadulterated and Honestly Presented Food is either unsafe, adulterated or not honestly presented. "
   • "3717-1-02.2(H) - Violation - Outer Clothing Food employees' outer clothing is dirty. "
   • "VII. Protection from Contamination Food separated and protected; food contact surfaces cleaned and sanitized; proper disposition of returned, previously served, reconditioned, and unsafe food."
   • "VI. Time/Temperature Controlled Safety Food Proper: cooking time and temperatures; reheating procedures for hot holding; cooling time and temperatures; hot holding temperatures; cold holding temperatures; date marking and disposition. Time as a public health control procedures and record."
   • "III. Preventing Contamination by Hands Adequate handwashing facilities supplied and accessible; hands clean and properly washed; no bare hand contact with ready-to-eat foods."
   • "3717-1-03.4(G)(1) - Violation - RTE TCS, date marking, food prepared in facility Refrigerated, ready-to-eat, TCS food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked. "
   • "3717-1-03.4(C) - Violation - Thawing TCS-Temperature & Time Control TCS food was improperly thawed."
   • "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-use limitation Wet wiping cloth was not maintained in a sanitizer solution between uses."
   • "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection. "
   • "3717-1-06.4(K) - Violation - Facilities: Pest control: The presence of insects, rodents, and other pests is not being adequately controlled or minimized."
   • "3717-1-06.1(K)(2)(a) - Violation - Facilities-insect control device location Insect control devices are located over a food preparation area"
   • "3717-1-05.1(L)(1) - Violation - Handwashing facilities Handwashing facility is not located to allow convenient use by employees."
   • "3717-1-04.8(G)(2) - Violation - Kitchenware and tableware-handling. Knives, forks, and spoons that are not prewrapped were not presented so that only the handles are touched by employees or consumers."
   • "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."
   • "3717-1-04.6(C)(2) - Violation - Food contact surfaces Hot water sanitizing After being cleaned, equipment food-contact surfaces and utensils were not sanitized in equipment achieving a utensil surface temperature of 160° F."
   • "3717-1-04.6(B) - Violation - Sanitizing frequency-before use after cleaning. Equipment food-contact surfaces or utensils were not sanitized before use after cleaning."
   • "3717-1-04.5(B)(3) - Violation - Cleaning frequency-TCS Surfaces and/or utensils used for TCS foods not cleaned every 4 hours."
   • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
   • "3717-1-04.5(A)(1)&(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
   • "3717-1-04.4(Q) - Violation - Utensils, measuring devices-repair/calibration. Utensils, temperature measuring, or pressure measuring devices were not kept in good repair and/or calibration."
   • "3717-1-04.4(M) - Violation - Mechanical warewashing-sanitization pressure. The flow pressure in a warewashing machine was not adequate."
   • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
   • "3717-1-06.2(C) - Violation - Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
   • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
   • "3717-1-06.4(L) - Violation - Facilities: Removing pests: The operator failed to remove dead pest(s) in a timely manner. "
   • "3717-1-04.4(L) - Violation - Mechanical warewashing -sanitization temperature The rinse temperature in a mechanical warewashing operation was not adequate to sanitize dishes and utensils."
   • "3717-1-04.4(J) - Violation - Mechanical warewashing-wash temperature. The wash solution temperature in a spray type warewasher was insufficient."
   • "3717-1-04.4(F)(2) - Violation - Warewashing sinks-use limitation, cleaning. Warewashing sink was not properly cleaned and/or sanitized."
   • "3717-1-04.4(F)(1) - Violation - Warewashing sinks-use limitation, handwashing. Warewashing sink was used for handwashing."
   • "3717-1-04.4(E) - Violation - Warewashing machines-manufacturers instructions. Warewashing machine was not operated according to the manufacturers instructions."
   • "3717-1-04.4(A)(3) - Violation - Equipment,good repair, can opener The can opener blade was dull and creating metal fragments"
   • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
   • "3717-1-03.4(F)(1)(b) - Violation - TCS-cold holding TCS foods were being held at temperatures >41° F."

5. Feb 25, 2018

   –
   4 violations

   • "III. Preventing Contamination by Hands Adequate handwashing facilities supplied and accessible; hands clean and properly washed; no bare hand contact with ready-to-eat foods."
   • "IV. Demonstration of Knowledge Person in Charge demonstrates knowledge by being certified in food protection, responding to food safety questions regarding the operation, or operation complies with the Ohio Administrative Code."
   • "VI. Time/Temperature Controlled Safety Food Proper: cooking time and temperatures; reheating procedures for hot holding; cooling time and temperatures; hot holding temperatures; cold holding temperatures; date marking and disposition. Time as a public health control procedures and record."
   • "VII. Protection from Contamination Food separated and protected; food contact surfaces cleaned and sanitized; proper disposition of returned, previously served, reconditioned, and unsafe food."

6. Feb 23, 2018

   –
   28 violations

   • "3717-1-04.4(F)(1) - Violation - Warewashing sinks-use limitation, handwashing. Warewashing sink was used for handwashing."
   • "3717-1-04.4(F)(2) - Violation - Warewashing sinks-use limitation, cleaning. Warewashing sink was not properly cleaned and/or sanitized."
   • "3717-1-04.4(J) - Violation - Mechanical warewashing-wash temperature. The wash solution temperature in a spray type warewasher was insufficient."
   • "3717-1-04.4(L) - Violation - Mechanical warewashing -sanitization temperature The rinse temperature in a mechanical warewashing operation was not adequate to sanitize dishes and utensils."
   • "3717-1-04.4(M) - Violation - Mechanical warewashing-sanitization pressure. The flow pressure in a warewashing machine was not adequate."
   • "3717-1-05.1(L)(1) - Violation - Handwashing facilities Handwashing facility is not located to allow convenient use by employees."
   • "3717-1-04.8(G)(2) - Violation - Kitchenware and tableware-handling. Knives, forks, and spoons that are not prewrapped were not presented so that only the handles are touched by employees or consumers."
   • "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."
   • "3717-1-04.6(C)(2) - Violation - Food contact surfaces Hot water sanitizing After being cleaned, equipment food-contact surfaces and utensils were not sanitized in equipment achieving a utensil surface temperature of 160° F."
   • "3717-1-04.6(B) - Violation - Sanitizing frequency-before use after cleaning. Equipment food-contact surfaces or utensils were not sanitized before use after cleaning."
   • "3717-1-04.5(C ) - Violation - Cooking / Baking equipment-Cleaning Frequency Food contact surfaces of cooking and baking equipment or cavities and door seals of microwaves were not cleaned frequently enough."
   • "3717-1-04.5(B)(3) - Violation - Cleaning frequency-TCS Surfaces and/or utensils used for TCS foods not cleaned every 4 hours."
   • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
   • "3717-1-04.5(A)(1)&(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
   • "3717-1-04.4(Q) - Violation - Utensils, measuring devices-repair/calibration. Utensils, temperature measuring, or pressure measuring devices were not kept in good repair and/or calibration."
   • "3717-1-06.4(K) - Violation - Facilities: Pest control: The presence of insects, rodents, and other pests is not being adequately controlled or minimized."
   • "3717-1-02.2(H) - Violation - Outer Clothing Food employees' outer clothing is dirty. "
   • "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection. "
   • "3717-1-02.4(B) - Violation - PIC Demonstration of Knowledge The person in charge was unable to demonstrate the necessary food safety knowledge. "
   • "3717-1-03.0 - Violation - Food Safe, Unadulterated and Honestly Presented Food is either unsafe, adulterated or not honestly presented. "
   • "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-use limitation Wet wiping cloth was not maintained in a sanitizer solution between uses."
   • "3717-1-06.1(K)(2)(a) - Violation - Facilities-insect control device location Insect control devices are located over a food preparation area"
   • "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
   • "3717-1-03.4(G)(1) - Violation - RTE TCS, date marking, food prepared in facility Refrigerated, ready-to-eat, TCS food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked. "
   • "3717-1-03.4(F)(1)(b) - Violation - TCS-cold holding TCS foods were being held at temperatures >41° F."
   • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
   • "3717-1-04.4(A)(3) - Violation - Equipment,good repair, can opener The can opener blade was dull and creating metal fragments"
   • "3717-1-04.4(E) - Violation - Warewashing machines-manufacturers instructions. Warewashing machine was not operated according to the manufacturers instructions."