"HYDE PARK GOLF & COUNTRY CLUB - SNACK BAR"

Order for delivery

Inspection history

1. Sep 1, 2023

   –
   8 violations

   • "3717-1-03.4(G)(4) - Violation - RTE TCS, date marking Date marking was not done in a consistent manner according to the code."
   • "3717-1-03.1(A)(1) - Violation - Sources compliance with food law Food is from an unapproved source."
   • "3717-1-03.2(D) - Violation - Food Storage containers-common name ID Working containers of food are not properly labeled."
   • "3717-1-06.1(M)(3) - Violation - Facilities-windows, doors protected Windows or doors were not protected against insects and rodents."
   • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
   • "3717-1-05.4(R) - Violation - Refuse/recyclables/returnables-removal frequency Refuse/recyclables/returnables not removed frequently enough."
   • "3701-21-22 - Violation - Food Choking Facility did not have accessible instructions for removing food of a choking victim."
   • "3717-1-02.4(C)(17) - Violation - PIC Duties -response plan for vomiting/diarrhea No/inadequate written procedures for response to vomiting/diarrheal events."

2. Jun 1, 2023

   –
   3 violations

   • "3717-1-03.4(G)(4) - Violation - RTE TCS, date marking Date marking was not done in a consistent manner according to the code."
   • "3717-1-03.4(F)(1)(b) - Violation - TCS-cold holding TCS foods were being held at temperatures >41° F."
   • "3717-1-03.2(A)(2) - Violation - Bare Hand Contact RTE Food Food employee was touching ready-to-eat food with bare hands."

3. Nov 16, 2022

   –
   1 violation

   • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."

4. Jun 8, 2022

   –
   10 violations

   • "3717-1-03.4(H)(1) - Violation - RTE TCS food, date marking disposition Ready-to-eat, TCS food was not discarded by the date mark, or was undated and not discarded or was not discarded when the date mark exceeded the required time/temperature combination."
   • "3717-1-03.4(G)(4) - Violation - RTE TCS, date marking Date marking was not done in a consistent manner according to the code."
   • "3717-1-02.4(B)(2)(p) - Violation - PIC Knowledge-explain complying with reporting responsibilities The person in charge shall be able to explain how the PIC, food employees, and conditional employees comply with reporting responsibilities and exclusion or restriction of food employees."
   • "3717-1-03.2(C)(1)(a) - Violation - Preventing Contamination by Separation, Packaging, and Segregation Ready-to-eat food was not protected from cross-contamination by raw animal food."
   • "3717-1-03.2(C)(2) - Violation - Protection from Contamination-Food Storage Food is stored unwrapped or in uncovered containers."
   • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
   • "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
   • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
   • "3717-1-03.2(D) - Violation - Food Storage containers-common name ID Working containers of food are not properly labeled."
   • "3717-1-04.2(G)(1) - Violation - Food temperature measuring devices. The operator did not have a food thermometer readily accessible. "

5. Dec 9, 2021

   –
   5 violations

   • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
   • "3717-1-04.5(D) - Violation - Non-food contact surfaces-Cleaning Frequency Nonfood-contact surfaces are not cleaned frequently enough."
   • "3717-1-04.8(F) - Violation - Storage-prohibitions. Cleaned and sanitized equipment, utensils, laundered linens, or single-service or single-use articles were stored in a prohibited area."
   • "3717-1-03.4(H)(1) - Violation - RTE TCS food, date marking disposition Ready-to-eat, TCS food was not discarded by the date mark, or was undated and not discarded or was not discarded when the date mark exceeded the required time/temperature combination."
   • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."

6. Aug 5, 2021

   –
   2 violations

   • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
   • "3717-1-04.4(P) - Violation - Warewashing equipment -sanitizer concentration. Sanitizer concentration is not being monitored."

7. Oct 22, 2020

   ✓

8. Apr 13, 2020

   ✓

9. Aug 29, 2019

   –
   10 violations

   • "3717-1-02.2(D) - Violation - Hands and arms-where to wash (handwashing) Food employee(s) were not washing hands in a handwashing sink."
   • "3717-1-06.2(C) - Violation - Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
   • "3717-1-07.0(B) - Violation - Poisonous/toxic material-working containers Working containers of poisonous/toxic materials are not labeled."
   • "3717-1-03.2(D) - Violation - Food Storage containers-common name ID Working containers of food are not properly labeled."
   • "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-use limitation Wet wiping cloth was not maintained in a sanitizer solution between uses."
   • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
   • "3717-1-04.2(H)(2) - Violation - Temperature indicator-mechanical warewashing. Irreversible registering temperature indicator is missing or not readily accessible."
   • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
   • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
   • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."

10. Jun 13, 2019

    –
    3 violations

    • "3717-1-04.4(E) - Violation - Warewashing machines-manufacturers instructions. Warewashing machine was not operated according to the manufacturers instructions."
    • "3701-21-02(H) - Violation - Display of License FSO license not displayed onsite or mobile FSO does not display required information or not in required lettering."
    • "3717-1-02.4(C)(16) - Violation - PIC Duties -response plan for vomiting/diarrhea No/inadequate written procedures for response to vomiting/diarrheal events."

11. Aug 30, 2018

    –
    2 violations

    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."

12. Jun 27, 2018

    –
    5 violations

    • "3717-1-05.1(O)(2) - Violation - Using handwashing facility-Other purposes Handwashing facility is being used for purposes other than handwashing. "
    • "3717-1-03.2(K) - Violation - In-use utensils-between-use storage In-use utensils are improperly stored. "
    • "3717-1-04.2(H)(2) - Violation - Temperature indicator-mechanical warewashing. Irreversible registering temperature indicator is missing or not readily accessible."
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."

13. Sep 1, 2017

    –
    6 violations

    • "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."
    • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
    • "3717-1-06.2(C) - Violation - Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.5(J)(1) - Violation - Rinsing procedures Utensils and/or equipment were not properly rinsed."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."

14. Aug 31, 2017

    ✓

15. Jul 13, 2017

    –
    8 violations

    • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.4(B) - Violation - Cutting surfaces. Cutting surface(s) unable to be effectively cleaned and sanitized."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.5(J)(1) - Violation - Rinsing procedures Utensils and/or equipment were not properly rinsed."
    • "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."
    • "3717-1-06.2(C) - Violation - Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
    • "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."

16. Aug 31, 2016

    –
    8 violations

    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.5(A)(1)&(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-04.2(G)(1) - Violation - Food temperature measuring devices. The operator did not have a food thermometer readily accessible. "
    • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
    • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
    • "3717-1-04.4(B) - Violation - Cutting surfaces. Cutting surface(s) unable to be effectively cleaned and sanitized."
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."

17. Jul 7, 2016

    –
    5 violations

    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
    • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
    • "3717-1-04.4(B) - Violation - Cutting surfaces. Cutting surface(s) unable to be effectively cleaned and sanitized."

18. Aug 27, 2015

    –
    6 violations

    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
    • "3717-1-07.0(B) - Violation - Poisonous or toxic materials -working containers Working containers of poisonous or toxic materials are not labeled."
    • "3717-1-03.2(A)(2) - Violation - Bare Hand Contact RTE Food Food employee was touching ready-to-eat food with bare hands. "

19. Jun 23, 2015

    –
    4 violations

    • "3717-1-03.4(G)(2) - Violation - RTE PHF, date marking-prepared in processing plant Ready-to-eat, TCS food that was prepared in a food processing plant and subsequently opened in a food service operation or a retail food establishment is not properly date marked. "
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-04.8(G)(1) - Violation - Kitchenware and tableware - handling. Single-service or single-use articles or cleaned and sanitized utensils were not handled, displayed, and dispensed so that contamination of food-and lip-contact surfaces is prevented."
    • "3717-1-07.0(B) - Violation - Poisonous or toxic materials -working containers Working containers of poisonous or toxic materials are not labeled."

20. Aug 26, 2014

    –
    9 violations

    • "3717-1-06.2(C) - Violation - Handwashing Facilities - Hand Drying Provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
    • "3717-1-03.4(G)(1) - Violation - RTE PHF, date marking, food prepared in facility Refrigerated, ready-to-eat, potentially hazardous food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked. "
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
    • "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."
    • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
    • "3717-1-06.4(H) - Violation - Facilities: Cleaning and maintenance of plumbing fixtures Maintaining and using handwashing facilities: Handwashing facilities are not being kept clean, and maintained and used as specified under paragraph (O) of rule 3717-1-05.1 of the Administrative Code."
    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."

21. Jun 17, 2014

    –
    5 violations

    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-06.2(C) - Violation - Handwashing Facilities - Hand Drying Provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-06.4(H) - Violation - Facilities: Cleaning and maintenance of plumbing fixtures Maintaining and using handwashing facilities: Handwashing facilities are not being kept clean, and maintained and used as specified under paragraph (O) of rule 3717-1-05.1 of the Administrative Code."

22. May 28, 2013

    –
    4 violations

    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-04.8(F) - Violation - Storage - prohibitions. Cleaned and sanitized equipment, utensils, laundered linens, or single-service or single-use articles were stored in a prohibited area."
    • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
    • "3717-1-04.4(B) - Violation - Cutting surfaces. Cutting board(s) unable to be effectively cleaned and sanitized."

23. Sep 11, 2012

    –
    6 violations

    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.8(E)(3) - Violation - Single-service and single-use articles - storage. Single-service and single-use articles were not stored in the original protective package or were stored by using other means that did not protect them from contamination."
    • "3717-1-04.8(E)(1) - Violation - Equipment, linens, single-service items - storage. Cleaned equipment or utensils, laundered linens, or single-service or single-use articles are not stored in a clean, dry location, protected from contamination."
    • "3717-1-03.2(D) - Violation - Food Storage containers--common name ID Working containers of food are not properly labeled. "
    • "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed. "

24. Aug 29, 2012

    –
    6 violations

    • "3717-1-04.8(E)(3) - Violation - Single-service and single-use articles - storage. Single-service and single-use articles were not stored in the original protective package or were stored by using other means that did not protect them from contamination."
    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed. "
    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-03.2(D) - Violation - Food Storage containers--common name ID Working containers of food are not properly labeled. "
    • "3717-1-04.8(E)(1) - Violation - Equipment, linens, single-service items - storage. Cleaned equipment or utensils, laundered linens, or single-service or single-use articles are not stored in a clean, dry location, protected from contamination."

25. Jun 27, 2012

    –
    4 violations

    • "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
    • "3717-1-04.5(B)(2) - Violation - Cleaning frequency-PHF Surfaces and/or utensils used for TCS foods not cleaned every four hours."
    • "3717-1-03.2(K) - Violation - In-use utensils--between-use storage In-use utensils are improperly stored. "
    • "3717-1-04.4(B) - Violation - Cutting surfaces. Cutting board(s) unable to be effectively cleaned and sanitized."