← Cincinnati
"MERCY MCAULEY HIGH SCHOOL"
6000 OAKWOOD AV, CINCINNATI, OH 45224
Last inspected Dec 27, 2023
Not graded. The source hasn't reported a grade or result for the latest record. CleanPlate never invents one.
–
Not gradedOrder for delivery
Inspection history
Dec 27, 2023
–1 violation
- "3717-1-04.2(A) - Violation - Equipment-Cooling, Heating, and Holding Capacities There is not adequate equipment for cooling, heating or holding food. "
Nov 15, 2023
–4 violations
- "3717-1-02.4(C)(2) - Violation - PIC Duties-unnecessary person There were persons unnecessary to the operation present in restricted areas."
- "3717-1-03.4(G)(1) - Violation - RTE TCS, date marking, food prepared in facility Refrigerated, ready-to-eat, TCS food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked."
- "3717-1-04.2(A) - Violation - Equipment-Cooling, Heating, and Holding Capacities There is not adequate equipment for cooling, heating or holding food. "
- "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
Apr 24, 2023
–8 violations
- "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
- "3717-1-05.4(G)(3) - Violation - Refuse-hand sink receptacles Refuse receptacle is not provided at each hand sink where using paper towels."
- "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
- "3717-1-03.2(D) - Violation - Food Storage containers-common name ID Working containers of food are not properly labeled."
- "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
- "3717-1-03.4(H)(1) - Violation - RTE TCS food, date marking disposition Ready-to-eat, TCS food was not discarded by the date mark, or was undated and not discarded or was not discarded when the date mark exceeded the required time/temperature combination."
- "3717-1-03.4(G)(4) - Violation - RTE TCS, date marking Date marking was not done in a consistent manner according to the code."
- "3717-1-03.4(G)(1) - Violation - RTE TCS, date marking, food prepared in facility Refrigerated, ready-to-eat, TCS food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked."
Mar 3, 2023
–1 violation
- "3717-1-02.4(A)(1) - Violation - PIC-Assignment of Responsibility No person in charge present in the food facility."
Nov 3, 2022
–11 violations
- "3717-1-02.4(B)(2)(k) - Violation - PIC Knowledge-cleaning and sanitizing The person in charge could not explain the correct procedures for cleaning and sanitizing."
- "3717-1-03.4(G)(4) - Violation - RTE TCS, date marking Date marking was not done in a consistent manner according to the code."
- "3717-1-03.4(H)(1) - Violation - RTE TCS food, date marking disposition Ready-to-eat, TCS food was not discarded by the date mark, or was undated and not discarded or was not discarded when the date mark exceeded the required time/temperature combination."
- "3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
- "3717-1-03.5(C) - Violation - Food labels-required information Food is not properly labeled."
- "3717-1-04.4(A)(2) - Violation - Equipment,good repair, doors, seals Equipment components were not intact, tight or properly adjusted. "
- "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
- "3717-1-04.4(J) - Violation - Mechanical warewashing-wash temperature. The wash solution temperature in a spray type warewasher was insufficient."
- "3717-1-05.4(G)(3) - Violation - Refuse-hand sink receptacles Refuse receptacle is not provided at each hand sink where using paper towels."
- "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
- "3717-1-06.4(E) - Violation - Facilities: Food/Ware/Handwash sink: Improper use Food preparation sinks, handwashing lavatories, and warewashing equipment are used for the cleaning of maintenance tools, the preparation or holding of maintenance materials, or the disposal of mop water and similar liquid wastes."
May 6, 2022
–13 violations
- "3717-1-05.1(G) - Violation - Handwashing facilities-number, location This food facility does not have the required number of conveniently located handwashing sinks."
- "3717-1-06.1(A) - Violation - Facilities-floors, walls, ceilings design The floors and coverings, walls and coverings, or ceilings are not designed, constructed, and installed so they are smooth and easily cleanable."
- "3717-1-05.1(J) - Violation - Backflow prevention device-when required An air gap or an approved backflow prevention device is not installed as required."
- "3717-1-04.4(E) - Violation - Warewashing machines-manufacturers instructions. Warewashing machine was not operated according to the manufacturers instructions."
- "3717-1-04.2(B)(3) - Violation - Manual warewashing-sink compartment requirements. The operator is using unapproved alternative manual warewashing equipment."
- "3717-1-04.2(B)(1) - Violation - Manual warewashing-sink compartment requirements. There is no 3-compartment sink in the facility. "
- "3717-1-04.4(A)(2) - Violation - Equipment,good repair, doors, seals Equipment components were not intact, tight or properly adjusted. "
- "3717-1-04.0(I) - Violation - Nonfood contact surfaces The non food contact surface is no longer corrosion -resistant, nonabsorbent and/or smooth."
- "3717-1-04.0(G) - Violation - Wood-use limitations Using an unapproved wood as a food contact surface."
- "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed."
- "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage."
- "3717-1-03.2(I)(1) - Violation - Food storage or display, contact with water or ice Food items are stored or displayed directly in contact with ice, water or undrained ice."
- "3717-1-03.4(F)(1)(b) - Violation - TCS-cold holding TCS foods were being held at temperatures >41° F."
Sep 16, 2021
–3 violations
- "3717-1-05.1(J) - Violation - Backflow prevention device-when required An air gap or an approved backflow prevention device is not installed as required."
- "3717-1-04.0(I) - Violation - Nonfood contact surfaces The non food contact surface is no longer corrosion -resistant, nonabsorbent and/or smooth."
- "3717-1-04.0(G) - Violation - Wood-use limitations Using an unapproved wood as a food contact surface."
Sep 15, 2021
–13 violations
- "3717-1-04.4(A)(3) - Violation - Equipment,good repair, can opener The can opener blade was dull and creating metal fragments"
- "3717-1-04.4(A)(2) - Violation - Equipment,good repair, doors, seals Equipment components were not intact, tight or properly adjusted. "
- "3717-1-04.8(E)(3) - Violation - Single-service and single-use articles-storage. Single-service and single-use articles were not stored in the original protective package or were stored by means that did not protect them from contamination."
- "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed."
- "3717-1-03.2(I)(1) - Violation - Food storage or display, contact with water or ice Food items are stored or displayed directly in contact with ice, water or undrained ice."
- "3717-1-04.4(M) - Violation - Mechanical warewashing-sanitization pressure. The flow pressure in a warewashing machine was not adequate."
- "3717-1-05.1(G) - Violation - Handwashing facilities-number, location This food facility does not have the required number of conveniently located handwashing sinks."
- "3717-1-06.1(A) - Violation - Facilities-floors, walls, ceilings design The floors and coverings, walls and coverings, or ceilings are not designed, constructed, and installed so they are smooth and easily cleanable."
- "3717-1-06.0(A)(1)(a) - Violation - Facilities-floors, walls, ceilings Indoor floor, wall, or ceiling surfaces are not smooth, durable, and easily cleanable in areas where FSO or RFE activities are conducted."
- "3717-1-04.4(E) - Violation - Warewashing machines-manufacturers instructions. Warewashing machine was not operated according to the manufacturers instructions."
- "3717-1-04.2(B)(4)(5) - Violation - Manual warewashing-sink compartment requirements. There is an unapproved 2-compartment sink in use or the 2-compartment sink is being used in an unauthorized manner. "
- "3717-1-04.2(B)(3) - Violation - Manual warewashing-sink compartment requirements. The operator is using unapproved alternative manual warewashing equipment."
- "3717-1-04.2(B)(1) - Violation - Manual warewashing-sink compartment requirements. There is no 3-compartment sink in the facility. "
Sep 14, 2021
–3 violations
- "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
- "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
- "3717-1-04.5(D) - Violation - Non-food contact surfaces-Cleaning Frequency Nonfood-contact surfaces are not cleaned frequently enough."
May 10, 2021
–7 violations
- "3717-1-04.4(M) - Violation - Mechanical warewashing-sanitization pressure. The flow pressure in a warewashing machine was not adequate."
- "3717-1-04.4(L) - Violation - Mechanical warewashing -sanitization temperature The rinse temperature in a mechanical warewashing operation was not adequate to sanitize dishes and utensils."
- "3717-1-04.8(E)(3) - Violation - Single-service and single-use articles-storage. Single-service and single-use articles were not stored in the original protective package or were stored by means that did not protect them from contamination."
- "3717-1-06.0(A)(1)(a) - Violation - Facilities-floors, walls, ceilings Indoor floor, wall, or ceiling surfaces are not smooth, durable, and easily cleanable in areas where FSO or RFE activities are conducted."
- "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
- "3717-1-03.2(I)(1) - Violation - Food storage or display, contact with water or ice Food items are stored or displayed directly in contact with ice, water or undrained ice."
- "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
Sep 17, 2020
–7 violations
- "3717-1-03.2(N)(1) - Violation - Gloves-use limitation, task specific Single use gloves were used for more than one task or were not changed when contaminated."
- "3717-1-02.2(C) - Violation - Hands and arms-when to wash (handwashing) Food employee(s) did not wash hands in situations that specifically require them to do so."
- "3717-1-02.4(C)(4) - Violation - PIC Duties-handwashing The person in charge was not ensuring that employees were effectively cleaning their hands as required."
- "3717-1-06.0(A)(1)(a) - Violation - Facilities-floors, walls, ceilings Indoor floor, wall, or ceiling surfaces are not smooth, durable, and easily cleanable in areas where FSO or RFE activities are conducted."
- "3717-1-02.3(C) - Violation - Hair restraints, effectiveness Food employee(s) did not have their hair effectively restrained."
- "3717-1-04.1(GG) - Violation - Equipment Compartments Drainage Equipment compartments are not designed to allow complete drainage."
- "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-use limitation Wet wiping cloth was not maintained in a sanitizer solution between uses."
Nov 1, 2019
–3 violations
- "3717-1-03.2(A)(4) - Violation - Permitted Bare Hand Contact RTE Food There is no variance, written procedure, written health policy, training documentation, hand washing documentation, or sufficient control measures."
- "3717-1-04.4(A)(2) - Violation - Equipment,good repair, doors, seals Equipment components were not intact, tight or properly adjusted. "
- "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
Jul 7, 2019
–7 violations
- "3717-1-04.4(J) - Violation - Mechanical warewashing-wash temperature. The wash solution temperature in a spray type warewasher was insufficient."
- "3717-1-02.4(C)(15) - Violation - PIC Duties -plans maintained and implemented Mandated written procedures and plans are not maintained and implemented as required."
- "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection."
- "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage."
- "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed."
- "3717-1-04.5(D) - Violation - Non-food contact surfaces-Cleaning Frequency Nonfood-contact surfaces are not cleaned frequently enough."
- "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
Mar 20, 2019
–4 violations
- "3717-1-02.4(C)(16) - Violation - PIC Duties -response plan for vomiting/diarrhea No/inadequate written procedures for response to vomiting/diarrheal events."
- "3717-1-06.1(A) - Violation - Facilities-floors, walls, ceilings design The floors and coverings, walls and coverings, or ceilings are not designed, constructed, and installed so they are smooth and easily cleanable."
- "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
- "3717-1-05.1(G) - Violation - Handwashing facilities-number, location This food facility does not have the required number of conveniently located handwashing sinks."
Feb 26, 2019
–1 violation
- "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection."
Apr 19, 2018
–6 violations
- "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage. "
- "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-use limitation Wet wiping cloth was not maintained in a sanitizer solution between uses."
- "3717-1-06.3(A) - Violation - Facilities: Handwashing facilities: Location Handwashing facilities were not conveniently located."
- "3717-1-06.1(A) - Violation - Facilities-floors, walls, ceilings design The floors & coverings, walls & coverings, or ceilings are not designed, constructed, and installed so they are smooth and easily cleanable."
- "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
- "3717-1-04.1(H) - Violation - Nonfood Contact Surfaces-Cleanability Nonfood-contact surfaces were not designed and constructed to allow easy cleaning and to facilitate maintenance."
Apr 18, 2018
✓Oct 13, 2017
–20 violations
- "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
- "3717-1-02.4(C)(13) - Violation - PIC Duties-employee training Employees are not properly trained in food safety. "
- "3717-1-06.2(D) - Violation - Facilities-handwash aids prohibited placement Food preparation sink, utensil washing sink, or the service sink was set up as a handwashing sink."
- "3717-1-05.1(L)(1) - Violation - Handwashing facilities Handwashing facility is not located to allow convenient use by employees."
- "3717-1-04.8(A)(2) - Violation - Equipment and utensils-air-drying required. Equipment and utensils were being cloth dried."
- "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."
- "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
- "3717-1-04.4(F)(1) - Violation - Warewashing sinks-use limitation, handwashing. Warewashing sink was used for handwashing."
- "3717-1-03.1(H)(2) - Violation - Temperature Specifications for Receiving cooked food Hot, cooked, TCS food was not received at 135° F or above. "
- "3717-1-03.2(D) - Violation - Food Storage containers-common name ID Working containers of food are not properly labeled. "
- "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed. "
- "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
- "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
- "3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection. "
- "3717-1-02.4(C)(16) - Violation - PIC Duties -response plan for vomiting/diarrhea No/inadequate written procedures for response to vomiting/diarrheal events."
- "3717-1-03.2(M)(2)(a) - Violation - Wiping cloths-use limitation Wet wiping cloth was not maintained in a sanitizer solution between uses."
- "3717-1-03.4(I)(1) - Violation - Time as a public health control Written procedures for time as a public health control improper or unavailable. "
- "III. Preventing Contamination by Hands Adequate handwashing facilities supplied and accessible; hands clean and properly washed; no bare hand contact with ready-to-eat foods."
- "VI. Time/Temperature Controlled Safety Food Proper: cooking time and temperatures; reheating procedures for hot holding; cooling time and temperatures; hot holding temperatures; cold holding temperatures; date marking and disposition. Time as a public health control procedures and record."
- "VII. Protection from Contamination Food separated and protected; food contact surfaces cleaned and sanitized; proper disposition of returned, previously served, reconditioned, and unsafe food."
Oct 12, 2017
✓May 31, 2017
–8 violations
- "3717-1-04.8(A)(1) - Violation - Equipment and utensils-air-drying required. Equipment and utensils are not being air dried or allowed to drain adequately after sanitizing."
- "3717-1-04.5(D) - Violation - Non-food contact surfaces-Cleaning Frequency Nonfood-contact surfaces are not cleaned frequently enough."
- "3717-1-04.5(B)(4)(e) - Violation - Cleaning frequency-TCS-Storage Equipment Food storage equipment is not cleaned frequently enough."
- "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
- "3717-1-04.5(A)(1)&(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."
- "3717-1-04.4(A)(2) - Violation - Equipment,good repair, doors, seals Equipment components were not intact, tight or properly adjusted. "
- "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
- "3717-1-04.1(KK) - Violation - Food Equipment-Certification and Classification Equipment is not approved by a recognized testing agency or authority."
May 12, 2017
✓Oct 12, 2016
✓4 violations
- "3717-1-04.1(A) - Violation - Equipment and Utensils-Durability and Strength Equipment and utensils were not designed and constructed to be durable enough to retain their properties under normal use."
- "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed. "
- "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
- "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."
May 20, 2016
–6 violations
- "3717-1-03.2(D) - Violation - Food Storage containers-common name ID Working containers of food are not properly labeled. "
- "3717-1-03.1(H)(2) - Violation - Temperature Specifications for Receiving cooked food Hot, cooked, TCS food was not received at 135° F or above. "
- "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed. "
- "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
- "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
- "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
May 13, 2016
✓Oct 28, 2015
–11 violations
- "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
- "VI. Time/Temperature Controlled Safety Food Proper: cooking time and temperatures; reheating procedures for hot holding; cooling time and temperatures; hot holding temperatures; cold holding temperatures; date marking and disposition. Time as a public health control procedures and record."
- "3717-1-03.2(D) - Violation - Food Storage containers--common name ID Working containers of food are not properly labeled. "
- "3717-1-03.2(Q) - Violation - Food Storage--preventing contamination form the premises Food items are not protected from contamination during storage. "
- "3717-1-03.4(F)(1)(b) - Violation - PHF, 41F cold holding TCS foods were being held temperatures above 41F (5C). "
- "3717-1-03.4(G)(1) - Violation - RTE PHF, date marking, food prepared in facility Refrigerated, ready-to-eat, potentially hazardous food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked. "
- "3717-1-03.4(H)(1) - Violation - RTE TCS food, date marking disposition Ready-to-eat, potentially hazardous food was not discarded by the date mark, or was undated and not discarded or was not discarded when the date mark exceeded the required time/temperature combination.. "
- "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
- "3717-1-04.5(C ) - Violation - Cooking / Baking equipment-Cleaning Frequency Food contact surfaces of cooking and baking equipment and/or cavities and door seals of microwaves were not cleaned."
- "3717-1-03.2(A)(2) - Violation - Bare Hand Contact RTE Food Food employee was touching ready-to-eat food with bare hands. "
- "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
More in Cincinnati
Source: Cincinnati Health Department. Data shown unmodified from the official record. See something wrong? Report a data issue.
