"NIPPERT W 100 LEVEL STAND 3"

Order for delivery

Inspection history

1. Nov 4, 2023

   ✓

2. Sep 20, 2023

   –
   1 violation

   • "3717-1-02.3(A) - Violation - Food contamination-eating Employees were eating, drinking or using tobacco in non-designated areas."

3. Nov 16, 2022

   –
   2 violations

   • "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage."
   • "3717-1-03.2(Y) - Violation - Miscellaneous sources of contamination Miscellaneous sources of contamination observed."

4. Sep 27, 2022

   –
   1 violation

   • "3717-1-04.5(A)(1)(2) - Violation - Equipment cleanliness-food contact Food-contact surfaces were dirty."

5. Nov 24, 2021

   –
   3 violations

   • "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
   • "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
   • "3717-1-06.4(J)(2) - Violation - Facilities: Lockers: Employee use Lockers or other suitable facilities are not being utilized for the orderly storage of employee clothing and other possessions."

6. Sep 9, 2021

   –
   4 violations

   • "3717-1-03.2(K) - Violation - In-use utensils-between-use storage In-use utensils are improperly stored."
   • "3717-1-06.4(N) - Violation - Maintaining premises: unnecessary items and litter. There are unnecessary or nonfunctional items and /or litter on the premises. "
   • "3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
   • "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."

7. Dec 28, 2020

   –
   4 violations

   • "3717-1-04.1(KK) - Violation - Food Equipment-Certification and Classification Equipment is not approved by a recognized testing agency or authority."
   • "3717-1-04.3(B)(1) - Violation - Fixed equipment installation-spacing or sealing. Fixed equipment was not properly installed."
   • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
   • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."

8. Oct 15, 2020

   ✓

9. Nov 12, 2019

   –
   3 violations

   • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
   • "3717-1-04.4(P) - Violation - Warewashing equipment -sanitizer concentration. Sanitizer concentration is not being monitored."
   • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."

10. Oct 1, 2019

    –
    2 violations

    • "3717-1-05.1(C)(1) - Violation - Handwashing facility-installation. Handwashing sink does not provide water at a temperature =100° F."
    • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."

11. Aug 21, 2018

    –
    4 violations

    • "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
    • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
    • "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."
    • "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage. "

12. Aug 13, 2018

    –
    6 violations

    • "3717-1-05.1(C)(1) - Violation - Handwashing facility-installation. Handwashing sink does not provide water at a temperature =100° F."
    • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
    • "3717-1-03.2(Q) - Violation - Food Storage-preventing contamination form the premises Food items are not protected from contamination during storage. "
    • "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."

13. Nov 30, 2017

    –
    4 violations

    • "3717-1-05.1(C)(1) - Violation - Handwashing facility-installation. Handwashing sink does not provide water at a temperature =100° F."
    • "3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-04.1(KK) - Violation - Food Equipment-Certification and Classification Equipment is not approved by a recognized testing agency or authority."

14. Jul 10, 2017

    –
    6 violations

    • "3717-1-05.1(S)(2) - Violation - Plumbing system-maintained in good repair Plumbing system is not maintained in good repair."
    • "3717-1-05.1(C)(1) - Violation - Handwashing facility-installation. Handwashing sink does not provide water at a temperature =100° F."
    • "3717-1-04.5(A)(3) - Violation - Equipment cleanliness-Nonfood-contact Non-food contact surfaces are dirty."
    • "3717-1-04.4(S)(1) - Violation - Single-service/ use articles-use limitation. Single-service or single-use articles were reused. "
    • "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."
    • "3717-1-02.3(A)(1)(2)(3) - Violation - Employee Drinks Observed unacceptable employee beverage containers. "

15. Oct 3, 2016

    –
    3 violations

    • "3717-1-06.2(C) - Violation - Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
    • "3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
    • "3717-1-03.4(F)(1)(a) - Violation - TCS-Hot Holding TCS foods were being hot held at temperatures <135° F or a roast <130° F."

16. Jul 25, 2016

    –
    3 violations

    • "3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
    • "3717-1-04.8(G)(2) - Violation - Kitchenware and tableware-handling. Knives, forks, and spoons that are not prewrapped were not presented so that only the handles are touched by employees or consumers."
    • "3717-1-02.3(A)(1)(2)(3) - Violation - Employee Drinks Observed unacceptable employee beverage containers. "

17. Oct 26, 2015

    –
    3 violations

    • "3717-1-06.4(F) - Violation - Facilities: Mops: Drying After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies."
    • "3717-1-04.6(C)(3) - Violation - Food contact surfaces, chemical sanitizing After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH."
    • "3717-1-05.1(S)(1) - Violation - Plumbing system - maintained in good repair Plumbing system is not repaired according to the Ohio building code."