← Glens Falls
B.P.O.E #81 - GLENS FALLS LODGE
32 CRONIN ROAD, QUEENSBURY, NY 12804
Last inspected Apr 10, 2026
Official source: New York State Department of Health (health.ny.gov) · All data sources
Passed. Met health requirements at the latest inspection. Some health departments report pass/fail instead of letter grades.
This source doesn’t issue a letter grade, so CleanPlate derived the status from the reported violation data.
✓
derivedOrder for delivery
Inspection history
Apr 10, 2026
✓1 violation
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Dec 19, 2025
✓1 violation
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
May 16, 2025
✓3 violations
- Non food contact surfaces of equipment not clean
- Miscellaneous, Economic Violation, Choking Poster, Training.
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Oct 24, 2024
✓2 violations
- In use food dispensing utensils improperly stored
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Dec 22, 2023
✕4 violations
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Critical: Cooked or prepared foods are subject to cross-contamination from raw foods.
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
Dec 13, 2022
✓2 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Dec 21, 2021
✕3 violations
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Critical: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Dec 4, 2020
✓1 violation
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
Nov 4, 2019
✕6 violations
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non food contact surfaces of equipment not clean
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Critical: Accurate thermometers not available or used to evaluate potentially hazardous food temperatures during cooking, cooling, reheating and holding.
Dec 7, 2018
✓5 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Insects, rodents present
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Pesticide application not supervised by a certified applicator
Sep 22, 2017
✕5 violations
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Non food contact surfaces of equipment not clean
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Critical: Cooked or prepared foods are subject to cross-contamination from raw foods.
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
Dec 13, 2016
✕9 violations
- Critical: Cooked or prepared foods are subject to cross-contamination from raw foods.
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Non food contact surfaces of equipment not clean
- Critical: Food from unapproved source, spoiled, adulterated on premises.
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Apr 1, 2016
✕9 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Pesticide application not supervised by a certified applicator
- Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Critical: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
Nov 13, 2015
✓1 violation
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Sep 17, 2015
✕6 violations
- Critical: Canned foods found in poor conditions (leakers, severe dents, rusty, swollen cans)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Apr 25, 2014
✕4 violations
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Critical: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
Apr 15, 2013
✕6 violations
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Critical: Accurate thermometers not available or used to evaluate potentially hazardous food temperatures during cooking, cooling, reheating and holding.
- Non food contact surfaces of equipment not clean
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Apr 19, 2012
✓3 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Mar 3, 2011
✓3 violations
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Improper thawing procedures used
- Non food contact surfaces of equipment not clean
Apr 13, 2010
✓6 violations
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Non food contact surfaces of equipment not clean
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Nov 3, 2009
✓6 violations
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Non food contact surfaces of equipment not clean
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Wiping cloths dirty, not stored properly in sanitizing solutions
Oct 21, 2008
✓3 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
Oct 17, 2007
✕6 violations
- Insects, rodents present
- In use food dispensing utensils improperly stored
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Critical: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
- Hot, cold running water not provided, pressure inadequate
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Nov 22, 2000
✓Oct 26, 1999
✓
More in Glens Falls
Source: New York State Department of Health (health.ny.gov). Data shown unmodified from the official government record. CleanPlate is an independent service, not affiliated with any government agency. See something wrong? Report a data issue.