← Lowville
HOWARD G. SACKETT CENTER
5836 NYS ROUTE 12, GLENFIELD, NY 13343
Last inspected May 28, 2026
Official source: New York State Department of Health (health.ny.gov) · All data sources
Passed. Met health requirements at the latest inspection. Some health departments report pass/fail instead of letter grades.
This source doesn’t issue a letter grade, so CleanPlate derived the status from the reported violation data.
✓
derivedOrder for delivery
Inspection history
May 28, 2026
✓Oct 20, 2025
✓1 violation
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Sep 10, 2024
✓2 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Single service items reused, improperly stored, dispensed, not used when required
Apr 18, 2024
✓Dec 13, 2023
✓Apr 5, 2023
✓Apr 5, 2022
✓1 violation
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Oct 20, 2021
✓Dec 1, 2020
✓Oct 2, 2019
✓1 violation
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Mar 13, 2019
✓2 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Wiping cloths dirty, not stored properly in sanitizing solutions
Nov 29, 2018
✓Oct 13, 2017
✓1 violation
- Non food contact surfaces of equipment not clean
May 4, 2017
✓2 violations
- Non food contact surfaces of equipment not clean
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
Nov 8, 2016
✓3 violations
- Non food contact surfaces of equipment not clean
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
Jan 21, 2016
✓4 violations
- Non food contact surfaces of equipment not clean
- Improper use and storage of clean, sanitized equipment and utensils
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
Sep 17, 2015
✓2 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
Feb 24, 2015
✓1 violation
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
Mar 7, 2014
✓4 violations
- Non food contact surfaces of equipment not clean
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Single service items reused, improperly stored, dispensed, not used when required
May 29, 2013
✓3 violations
- Improper use and storage of clean, sanitized equipment and utensils
- Non food contact surfaces of equipment not clean
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Oct 16, 2012
✓4 violations
- Non food contact surfaces of equipment not clean
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Adequate, leakproof, non-absorbent, vermin-proof, covered containers not provided where needed
May 18, 2011
✓8 violations
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
- Improper use and storage of clean, sanitized equipment and utensils
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
Oct 5, 2010
✓2 violations
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Non food contact surfaces of equipment not clean
May 4, 2009
✓4 violations
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Single service items reused, improperly stored, dispensed, not used when required
- Non food contact surfaces of equipment not clean
Oct 3, 2008
✓2 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
More in Lowville
Source: New York State Department of Health (health.ny.gov). Data shown unmodified from the official government record. CleanPlate is an independent service, not affiliated with any government agency. See something wrong? Report a data issue.