← Rochester
PONTILLO'S PIZZERIA (BRIGHTON)
1820 MONROE AVENUE, ROCHESTER, NY 14618
Last inspected Dec 23, 2025
Passed. Met health requirements at the latest inspection. Some health departments report pass/fail instead of letter grades.
This source doesn’t issue a letter grade, so CleanPlate derived the status from the reported violation data.
✓
derivedOrder for delivery
Inspection history
Dec 23, 2025
✓4 violations
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Tobacco is used; eating, drinking in food preparation, dishwashing food storage areas
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
Dec 4, 2024
✓5 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Single service items reused, improperly stored, dispensed, not used when required
- Non food contact surfaces of equipment not clean
- Wiping cloths dirty, not stored properly in sanitizing solutions
Nov 20, 2023
✓2 violations
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Dec 7, 2022
✓3 violations
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non food contact surfaces of equipment not clean
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Feb 18, 2021
✓4 violations
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
Mar 2, 2020
✓1 violation
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
Feb 19, 2020
✕6 violations
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Critical:Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45�F as required.
- Improper use and storage of clean, sanitized equipment and utensils
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
May 1, 2019
✓2 violations
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
Feb 27, 2018
✓5 violations
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
- Miscellaneous, Economic Violation, Choking Poster, Training.
Jun 27, 2017
✓1 violation
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
Jun 6, 2017
✓7 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Miscellaneous, Economic Violation, Choking Poster, Training.
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
Jun 24, 2015
✓3 violations
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
Jun 13, 2014
✓7 violations
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Single service items reused, improperly stored, dispensed, not used when required
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Jun 25, 2013
✓6 violations
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non food contact surfaces of equipment not clean
Feb 24, 2012
✓7 violations
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non food contact surfaces of equipment not clean
Feb 9, 2012
✕12 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Non food contact surfaces of equipment not clean
- Critical:Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
- Single service items reused, improperly stored, dispensed, not used when required
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
Mar 14, 2011
✓Feb 25, 2011
✓6 violations
- Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Non food contact surfaces of equipment not clean
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
Jan 12, 2010
✓3 violations
- Non food contact surfaces of equipment not clean
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Jan 15, 2009
✕3 violations
- Critical:Potentially hazardous foods are not kept at or above 140�F during hot holding.
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
More in Rochester
Source: New York State Department of Health. Data shown unmodified from the official record. See something wrong? Report a data issue.
