VIEW AT BROOKHAVEN (THE)

Order for delivery

Inspection history

1. Jun 15, 2026

   ✓
   6 violations

   • In use food dispensing utensils improperly stored
   • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
   • Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
   • Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
   • Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
   • Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces

2. Dec 12, 2025

   ✕
   4 violations

   • Insects, rodents present
   • Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
   • Critical:Enough hot holding equipment is not present, properly designed, maintained and operated to keep hot foods above 140�F.
   • Non food contact surfaces of equipment not clean

3. Jun 3, 2025

   ✓
   6 violations

   • Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
   • Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
   • Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
   • Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
   • Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
   • Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions