SUNY Potsdam Becky's Place
44 Pierrepont Avenue, Potsdam, NY 13676
Last inspected Oct 10, 2025
Official source: New York State Department of Health (health.ny.gov) · All data sources
Passed. Met health requirements at the latest inspection. Some health departments report pass/fail instead of letter grades.
This inspection record doesn’t carry an official letter grade — some health departments never issue one, and others (like NYC) post it after a grace period — so CleanPlate derived the status from the reported violation data. If the department posts an official grade, it replaces this automatically.
Order for delivery
The record, in plain English
CleanPlate holds 19 inspections on record for SUNY Potsdam Becky's Place, spanning November 2008 to October 2025 — every one straight from New York State Department of Health.
It has held passed across its last two inspections.
The most recent inspection noted 2 violations, none of them critical.
Every sentence above is computed directly from the official record — CleanPlate adds no opinions. How our grading works →
Inspection history
Oct 10, 2025
✓2 violations
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
Sep 17, 2024
✓4 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Dec 8, 2023
✓5 violations
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
Mar 17, 2022
✓4 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Dec 1, 2021
✕7 violations
- Critical: Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
- Critical: Potentially hazardous foods are not kept at or above 140�F during hot holding.
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Critical: Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45�F as required.
Sep 22, 2020
✕3 violations
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Critical: Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
Oct 18, 2019
✕5 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Critical: Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
- Improper use and storage of clean, sanitized equipment and utensils
Sep 7, 2018
✕6 violations
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Non food contact surfaces of equipment not clean
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Critical: Enough hot holding equipment is not present, properly designed, maintained and operated to keep hot foods above 140�F.
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
Nov 8, 2017
✕4 violations
- Critical: Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
Oct 5, 2016
✕5 violations
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Critical: Potentially hazardous foods are not kept at or below 45�F during cold holding, except smoked fish not kept at or below 38�F during cold holding.
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Mar 15, 2016
✓3 violations
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Oct 1, 2015
✓3 violations
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non food contact surfaces of equipment not clean
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
Apr 16, 2015
✕6 violations
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- In use food dispensing utensils improperly stored
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Critical: Potentially hazardous foods are not kept at or above 140�F during hot holding.
- Improper use and storage of clean, sanitized equipment and utensils
Apr 1, 2014
✓2 violations
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
Feb 14, 2013
✕1 violation
- Critical: Potentially hazardous foods are not kept at or above 140�F during hot holding.
Apr 4, 2012
✓6 violations
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Single service items reused, improperly stored, dispensed, not used when required
Mar 24, 2011
✓3 violations
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Single service items reused, improperly stored, dispensed, not used when required
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
Mar 16, 2010
✓2 violations
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
Nov 6, 2008
✕2 violations
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Critical: Potentially hazardous foods are not kept at or above 140�F during hot holding.
More in St. Lawrence County
Source: New York State Department of Health (health.ny.gov). Data shown unmodified from the official government record. CleanPlate is an independent service, not affiliated with any government agency. See something wrong? Report a data issue.
